Aquatec CDP 8800 water booster pump + Transformer 115V 1/4 & 3/8

#ad
#ad
aquatec 8852-2J03-B423 #ad - If you are using this for a RO system you may need to order separately a pressure switch and/or a solenoid valve. It can self prime but input tubing need to be all the way near the bottom of the container and be tied down/ tether with heavy object so the tubing can stay near the bottom and not floating up.

That's different model. So this setup will work for both 3/8" and 1/4" OD tubing. The number of nozzles the pump can support depends on the flow rate of the total nozzles and the pressure you want to achieve. This pump is not for increasing pressure to ice maker or refrigerator. The pump has 3/8" quick connect inlet and outlet for 3/8" tubing.

Aquatec CDP 8800 water booster pump + Transformer 115V 1/4 & 3/8 #ad - Include heavy duty steel base plate and damper. The input/output of the pump is 3/8" quick connect fitting, we also include two reducer fitting to 1/4" if you have 1/4" tubing. Please note that the pump need to be placed at floor level, the pump need to be lower than the water level. This pump is to increase input pressure to a RO system.

If you are buying this pump for misting application. For ice maker pump or increasing output pump, please get Aquatec 5851 07gpm to 1 gpm pump this is aquatec Boost pump and transformer for Reverse Osmosis Water systems.

More information about aquatec 8852-2J03-B423 #ad

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4

#ad
#ad
Malida #ad - Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Pressure gauge pack includes: 1 x pressure gauge with ¼" male connection 1 x ¼" female to ¼" push fit 1 x ¼" Stem to ¼" push fit to ¼" push fit T Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe.

Stainless pressure Gauge 220 PSI with fitting. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Using a pressure gauge with your reverse osmosis system can be a great addition to your system as most problems that occur with reverse osmosis systems can relate to your water pressure.

Malida Water Pressure Gauge Stainless For Aquarium Meter 0-1.6MPa 0-220psi Reverse Osmosis System Pump With 1/4 #ad - Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

More information about Malida #ad


Similar products



Anderson Metals 759106-04 1/4-Inch by 1/4-Inch Straight Needle Valve, Brass

#ad
#ad
Anderson Metals Corp., 759106-04 #ad - The product is 1/4x1/4 Needle Valve. Straight needle valve. 1/4 inch x 1/4 inch. Anderson metals is a family-owned and operated manufacturer of brass fittings, valves and pipe nipples based in Kansas City, MO since 1951. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. The product is manufactured in China.

The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Our capabilities for manufacturing include both standard off-the-shelf items and custom run parts. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Made of Brass.

Anderson Metals 759106-04 1/4-Inch by 1/4-Inch Straight Needle Valve, Brass #ad - Professional quality. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Easy and simple use kit. We specialize in products manufactured from brass forgings, rod and castings. Stainless pressure Gauge 220 PSI with fitting.

More information about Anderson Metals Corp., 759106-04 #ad


Similar products



Reverse Osmosis Membrane Housing with 1/4" Quick-Connect Fittings

#ad
#ad
No Brand Marking No Brand Marking #ad - The product is manufactured in China. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Professional quality. Standard size reverse Osmosis Membrane Housing with built-in 1/4" quick-connect fittings. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other.

Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. The product is 1/4x1/4 Needle Valve. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. 1/4 inch x 1/4 inch. Straight needle valve. Built-in 1/4" quick-connect fittings. Made of Brass. Standard size Reverse Osmosis Membrane Housing.

Reverse Osmosis Membrane Housing with 1/4" Quick-Connect Fittings #ad - Stainless pressure Gauge 220 PSI with fitting. Easy and simple use kit.

More information about No Brand Marking No Brand Marking #ad


Similar products



Pentek 158117 1/4" #10 Slim Line Clear Filter Housing

#ad
#ad
Pentair Industries 1/4" #10 Slim Blue/Clear Housing #ad - Water filters are used in a wide range of applications, swimming pools, industrial processes, including drinking water purification, and irrigation, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.

The company, mn, founded in 1966 and headquartered in Minneapolis, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. Maximum temperature of 125 degrees F 51. 7 degrees C. This filter housing is for use in various applications, food service, including residential drinking water filtration, and humidifying systems, among others.

Pentek 158117 1/4" #10 Slim Line Clear Filter Housing #ad - Specifications filter cartridge size H x W sold separately 5 x 2-1/2 inches 127 x 63. 5 mm initial pressure drop at 3 gpm 2 psi Maximum temperature 125 degrees F 51. 7 degrees c maximum pressure 125 psi maximum dimensions h x w 12-1/8 x 4-5/8 inches 308 x 118 mmH is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems.

More information about Pentair Industries 1/4" #10 Slim Blue/Clear Housing #ad


Similar products



FS-TFC Reverse Osmosis Membrane Housing 1812/2012 with 1/4" Quick-Connect Fittings for Ro Menbrane 50/75/100/150 GPD -White

#ad
#ad
Whirlping HY-50RO membrane housing #ad - Standard size 2. 0 inch reverse osmosis Membrane Housing with 1/4" Quick-Connect Fittings. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. The product is 1/4x1/4 Needle Valve. Constructed of high Quality Food grade Polypropylene and Thicker body for better durability. Easy and simple use kit.

Made of Brass. Include wrench*1, one stop purchase, check valve*1, 1/4" Quick-Connect Fittings*2, extra enjoy. Applications:. This membrane housing is used in Home RO Systems, and will fit most standard residential RO Membranes. Stronger membrane cup design to prevent cracking. 30 bar pressure standable. Features:.

FS-TFC Reverse Osmosis Membrane Housing 1812/2012 with 1/4" Quick-Connect Fittings for Ro Menbrane 50/75/100/150 GPD -White #ad - Durable, anti-explosion;. Portability;. Widely used in RO system;. Competitive price, high quality, long lifetime;. Can effectively work with other water spare parts;. Food grade polyethylene will not cause pollution to water;. Top design to extend the filtration surface area;.

More information about Whirlping HY-50RO membrane housing #ad


Similar products



ATP IMBIBE NSF 61 Polyethylene Plastic Tubing, White, 11/64" ID x 1/4" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) #ad - Stronger membrane cup design to prevent cracking. 30 bar pressure standable. Good dielectric properties. The product is 1/4x1/4 Needle Valve. Impermeable to gases. The product is manufactured in China. Maximum temperature of 125 degrees F 51. 7 degrees C. Universal compatiable for 2. 0 inch residential membrane housing on Most standard RO Systems Fits 1812 /2012 membranes50-150GPD.

Slim filter housing for low-flow applications with space restrictions. Pressure gauge with fittings for quickfit connection to 1/4" 6mm Water Pipe. Used a lot on the water pipe prior to your reverse osmosis system / aquarium ro / other. Stainless pressure Gauge 220 PSI with fitting. Use with a 10" x 2-1/2" sediment or carbon filter cartridge sold separately.

ATP IMBIBE NSF 61 Polyethylene Plastic Tubing, White, 11/64" ID x 1/4" OD, 100 feet Length #ad - Include wrench*1, check valve*1, 1/4" Quick-Connect Fittings*2, one stop purchase, extra enjoy. Chemically inert and chemical resistant. Initial pressure drop of 2 psi at a flow rate of 3 gpm. Manufactured from 100 percent non-toxic ingredients, imbibe is perfect for drinking water, beverage and food applications.

Standard size Reverse Osmosis Membrane Housing.

More information about Advanced Technology Products (ATP) #ad


Similar products



RO Membrane, Membrane Solutions Reverse Osmosis 150GPD-2012 Membrane and 1812/2012 RO Membrane Housing DIY Kit,1/4 Quick Connector,Check valve,Wrench Whole Set

#ad
#ad
Membrane Solutions Corp #ad - Stronger membrane cup design to prevent cracking. 30 bar pressure standable. Straight needle valve. Ro membrane housing suitable for housing any standard 1812 / 2012 RO Membranes 24-150GPD With User Friendly Design, Easy installation, No tools required. Ro membrance have excellent compatibility, Suitable for All major brand 3/5-stage Reverse Osmosis Water Filter System.

Built-in 1/4" quick-connect fittings. Clear styrene-acrylonitrile SAN for on-site viewing of flow and cartridge condition. Have any questions, please contact me promptly. Impermeable to gases. Professional quality. And ro membrance housing material has excellent insulating property, it can protect reverse osmosis element from the outside temperature.

RO Membrane, Membrane Solutions Reverse Osmosis 150GPD-2012 Membrane and 1812/2012 RO Membrane Housing DIY Kit,1/4 Quick Connector,Check valve,Wrench Whole Set #ad - Made of Brass. Ms reverse osmosis membrane technology, virus, such as organics, microorganism, Provide Medical Grade Filtration, cancer-organic substance, ro membrance remove larger then 0.0001um, metal ion, and other soluble salt in water. Reverse osmosis membrane housing manufactured with frp(fiber reinforced Polypropylene) and ABS, this ro membrane housing is capable to resist acids, alcohol, oils, ammonia, Better Durability while Weighted Lighter, plating solutions & many aggressive chemicals.

Ro membrane housing with double seal design, thicker bowl increase the compressive capacity and explosion proof strength. Include wrench*1, check valve*1, one stop purchase, 1/4" Quick-Connect Fittings*2, extra enjoy.

More information about Membrane Solutions Corp #ad


Similar products



Malida 1/4" Tee 3 Way Tube Quick Connect Push Fit RO Water Reverse Osmosis System set of 10

#ad
#ad
Malida #ad - Include wrench*1, check valve*1, 1/4" Quick-Connect Fittings*2, one stop purchase, extra enjoy. Chemically inert and chemical resistant. Professional quality. Constructed of high Quality Food grade Polypropylene and Thicker body for better durability. And ro membrance housing material has excellent insulating property, it can protect reverse osmosis element from the outside temperature.

1/4" 3-way Tee quick connect. Stronger membrane cup design to prevent cracking. 30 bar pressure standable. Reverse osmosis membrane with standard 2012 size of 12"in Overall Length, 2. 0"in Diameter. Initial pressure drop of 2 psi at a flow rate of 3 gpm. We can provide lifetime support Guarantee and 30-Day Money Back Guarantee.

Malida 1/4" Tee 3 Way Tube Quick Connect Push Fit RO Water Reverse Osmosis System set of 10 #ad - The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. Maximum temperature of 125 degrees F 51. 7 degrees C. Have any questions, please contact me promptly. Easy to install. Suitable for water, coffee, etc.

More information about Malida #ad


Similar products



Alberts Filter 150GPD Reverse Osmosis Membrane Filter Replacement for Water Filter System, 2012 150GPD RO Filter,1/4 Quick Connector,Check Valve,Wrench Whole Set

#ad
#ad
Alberts Filter #ad - Standard size 2. 0 inch reverse osmosis Membrane Housing with 1/4" Quick-Connect Fittings. The product is 1/4x1/4 Needle Valve. Built-in 1/4" quick-connect fittings. Standard size Reverse Osmosis Membrane Housing. We will be delighted to solve your problem. Straight needle valve. Initial pressure drop of 2 psi at a flow rate of 3 gpm.

Stainless pressure Gauge 220 PSI with fitting. Reverse osmosis membrane with standard 2012 size of 12"in Overall Length, 2. 0"in Diameter. The water filter men pressure Gauge for Aquarium RO Reverse Osmosis System with 1/4. 1/4" 3-way Tee quick connect. Slim filter housing for low-flow applications with space restrictions.

Alberts Filter 150GPD Reverse Osmosis Membrane Filter Replacement for Water Filter System, 2012 150GPD RO Filter,1/4 Quick Connector,Check Valve,Wrench Whole Set #ad - Universal compatiable for 2. 0 inch residential membrane housing on Most standard RO Systems Fits 1812 /2012 membranes50-150GPD. The product is manufactured in China. Include wrench*1, check valve*1, one stop purchase, 1/4" Quick-Connect Fittings*2, extra enjoy. Chemically inert and chemical resistant.

More information about Alberts Filter #ad


Similar products



ATP Value-Tube LDPE Plastic Tubing, Black, 1/4" ID x 3/8" OD, 100 feet Length

#ad
#ad
Advanced Technology Products (ATP) PE38ABK #ad - Impermeable to gases. It's inert nature and fda compliant status makes it perfect for food and beverage piping not requiring NSF certification. The product is 1/4x1/4 Needle Valve. Pressure gauge for use with reverse osmosis systems, aquarium discuss marine systems and all water filter systems. Easy and simple use kit.

Atp value-tube linear low density polyethylene tubing. High quality :ro membrane with fda registered, remove the particles of heavy metal primarily calcium and magnesium, NSF/ANSI 58 Certified approved to ensure safety and non-toxic and reverse osmosis membrane have Smooth contact surfaces, lead, chromium and nitrates, bacterial and any other carbonates from source water.

ATP Value-Tube LDPE Plastic Tubing, Black, 1/4" ID x 3/8" OD, 100 feet Length #ad - Standard: 2012 size of 12"in overall length, ge, axeon, 2.0"in diameter. This membrane can be used to replace csm, and any other 2012 style membranes;housing material has excellent insulating property, Dow FilmTec, it can protect reverse osmosis element from the outside temperature ;element from the outside temperature ;Smooth contact surfaces to prevent bacteria and dirt buildup;The outlet of concentrated water has been optimized to ensure the connect variability during the installation process.

Easy installation: no tools required. Ro membrane have excellent compatibility, Suitable for All major brand 3/5-stage Reverse Osmosis Water Filter System. Widely used:rejects wide spectrum of impurities down to. 0001 micron.

More information about Advanced Technology Products (ATP) PE38ABK #ad


Similar products

Comments have been closed/disabled for this content.


Pohsili is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.