Hi-Lift Jack 4X400 4XRAC Jack Mounting System

#ad
#ad
ARB 4X400 #ad - A thru hole in the carriage bolts allows placement of an owner supplied padlock for added security. Velcro handle strap secures handle to jack bar. The hi-lift 4xrac jack mounting system is designed for serious off-roaders looking for an easy, inexpensive way to stow a Hi-Lift jack in a convienent, secure location.

Each kit contains two mounting brackets, two mounting bracket caps, velcro securing strap and all necessary hardware. The hi-lift jack 4xrac jack mounting system is designed for serious off-roaders looking for an easy, inexpensive way to stow a Hi-Lift jack in a convienent, secure location. Each kit contains two mounting brackets, two mounting bracket caps, velcro securing strap, all necessary hardware and complete instructions.

Hi-Lift Jack 4X400 4XRAC Jack Mounting System #ad - Heavy duty, 1/8 inch steel mounting brackets are slotted for adjustment.

More information about ARB 4X400 #ad

Hi-Lift Jack HK-B Black Handle-Keeper

#ad
#ad
ARB HK-B #ad - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Molded in black. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Crafted from rugged polyurethane material. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Easily slips on and off for quick, no hassle removal when you need to use your jack.

More information about ARB HK-B #ad


Similar products



Hi-Lift Jack ORB Off-Road Base

#ad
#ad
ARB ORB #ad - Rugged construction for strength and durability. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. A drilled hole in the center of the base allows the off-Road Base to be attached to a Hi-Lift jack bar for storage when not in use, using an owner supplied 5/16 inch x 4 inch bolt and wing nut.

Molded in black. Alleviates jack sinkage on soft surfaces. These teeth allow the user to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use. Molded in high visibility red, making it harder to leave behind when the task is completed. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis.

Hi-Lift Jack ORB Off-Road Base #ad - The hi-lift jack off-road Base is designed to alleviate jack sinkage on soft surfaces. Easily slips on and off for quick, no hassle removal when you need to use your jack. A clean, flat surface gives the Off-Road Base better footing and greater stability during the lifting process. Drilled hole in center of base for convenient storage on jack bar.

The off-road base is compatible with all Hi-Lift jacks.

More information about ARB ORB #ad


Similar products



Hi-Lift Jack LM-100 Lift-Mate

#ad
#ad
ARB LM100 #ad - The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Molded in black. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Rubber pad protects tire/wheel at lifting point on jack. Drilled hole in center of base for convenient storage on jack bar.

Many trucks and suv's have larger tires and/or lift kits that can prevent use of a standard Hi-Lift jack, when lifting from a bumper, due to exceeding the lifting length of the jack. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Hi-Lift Jack LM-100 Lift-Mate #ad - Crafted from rugged polyurethane material. Easily slips on and off for quick, no hassle removal when you need to use your jack. Compatible with all Hi-Lift jacks. Rubber coated hooks protect wheels. The lift-mate is designed to operate in a manner that allows the wheel or vehicle to be lifted directly from the wheel, greatly reducing the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

Rugged construction for strength and durability. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

More information about ARB LM100 #ad


Similar products



Hi-Lift Jack HL484 48" Hi-Lift Black Cast and Steel Jack

#ad
#ad
ARB HLJHL484 #ad - Rubber pad protects tire/wheel at lifting point on jack. Drilled hole in center of base for convenient storage on jack bar. Easily slips on and off for quick, no hassle removal when you need to use your jack. Safe use information stickers, including rated load details and operating instructions, affixed to handle.

Compatible with all Hi-Lift jacks. The hi-lift jack hl484 48 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components. Rubber coated hooks protect wheels. Rugged construction for strength and durability. Two piece handle and socket is durable and reliable;Operation type : Mechanical.

Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks. When its a heavy duty situation, the tool had better be a Hi-Lift! The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

Hi-Lift Jack HL484 48" Hi-Lift Black Cast and Steel Jack #ad - Crafted from rugged polyurethane material. For greater safety, all hi-lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height. 5, 000 pound lift capacity.

More information about ARB HLJHL484 #ad


Similar products



Hi-Lift Jack HK-R Red Handle-Keeper

#ad
#ad
ARB HK-R #ad - The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage. Crafted from rugged polyurethane material. Compatible with all Hi-Lift jacks. Two piece handle and socket is durable and reliable;Operation type : Mechanical.

Easily slips on and off for quick, no hassle removal when you need to use your jack. Drilled hole in center of base for convenient storage on jack bar. Rugged construction for strength and durability. Alleviates jack sinkage on soft surfaces. Safe use information stickers, including rated load details and operating instructions, affixed to handle.

Hi-Lift Jack HK-R Red Handle-Keeper #ad - For greater safety, all hi-lift jacks are equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds. The hi-lift jack hl484 48 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components. Rubber pad protects tire/wheel at lifting point on jack.

Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height. Rubber coated hooks protect wheels. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel.

More information about ARB HK-R #ad


Similar products



Hi-Lift Jack ORK Off-Road Kit

#ad
#ad
ARB ORK #ad - Includes eight foot tree saver strap. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Two piece handle and socket is durable and reliable;Operation type : Mechanical. The hi-lift jack hl484 48 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.

Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks. Alleviates jack sinkage on soft surfaces. The hi-lift jack off-road kit contains all the accessories needed for winching with a Hi-Lift jack all in one convenient bag. Rubber pad protects tire/wheel at lifting point on jack.

Hi-Lift Jack ORK Off-Road Kit #ad - Safe use information stickers, including rated load details and operating instructions, affixed to handle. 5, 000 pound lift capacity. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Greatly reduces the amount of travel up the jack bar required to lift the wheel to an adequate and safe height.

Also includes a pair of Hi-Lift gloves, necessary hardware and gear bag. Includes custom nose attachment.

More information about ARB ORK #ad


Similar products



Hi-Lift Jack XT485 48" Hi-Lift X-TREME Jack

#ad
#ad
ARB HLJXT485 #ad - Compatible with all Hi-Lift jacks. Rubber pad protects tire/wheel at lifting point on jack. Serrated teeth along one side helps scrape or level ground for base. Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware. Molded in black. Easily slips on and off for quick, no hassle removal when you need to use your jack.

The hi-lift jack x-treme jack is our top of the line, all-cast jack that includes many special features. Drilled hole in center of base for convenient storage on jack bar. Our jacks are designed to help you survive in the most demanding situations - whether you are in the Moab desert canyons, the Welsh mountains, the Amazon jungle or the farmlands of Indiana.

Although light in weight and easy to manuever, the hi-lift jack offers a rated load capacity of 4, 660 pounds 2114kg and a tested load capacity of 7, 000 pounds 3175kg, achieving a 150% safety factor. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Easily slips on and off for quick, no hassle removal when you need to use your jack.

Hi-Lift Jack XT485 48" Hi-Lift X-TREME Jack #ad - Safe use information stickers, including rated load details and operating instructions, affixed to handle. The hi-lift jack xt-485 48 inch x-treme jack is our top of the line, all-cast jack that includes the following special features: charcoal metallic powder-coat finish, gold zinc-coated hardware and handle, a unique top winch/clamp/spreader attachment.

When its a heavy duty situation, the tool had better be a Hi-Lift! The hi-lift handle-keeper holds the hi-Lift jack handle to the upright steel bar, keeping it in place when not in use and eliminating rattling during transportation and storage.

More information about ARB HLJXT485 #ad


Similar products



Hi-Lift Jack BL-250 Bumper Lift

#ad
#ad
ARB BL-250 #ad - Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware. Rugged construction for strength and durability. Two piece handle and socket is durable and reliable, clamping, One position for all winching, and spreading positions. Safe use information stickers, including rated load details and operating instructions, affixed to handle.

Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks. Alleviates jack sinkage on soft surfaces. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel. Two piece handle and socket is durable and reliable;Operation type : Mechanical.

Hi-Lift Jack BL-250 Bumper Lift #ad - Molded in red. Includes eight foot tree saver strap. Rubber coated hooks protect wheels. Serrated teeth along one side helps scrape or level ground for base. Drilled hole in center of base for convenient storage on jack bar. Easily slips on and off for quick, no hassle removal when you need to use your jack. Compatible with all Hi-Lift jacks.

More information about ARB BL-250 #ad


Similar products



Hi-Lift Jack NJC Neoprene Jack Cover

#ad
#ad
ARB NJC #ad - Molded in red. Rubber pad protects tire/wheel at lifting point on jack. Includes custom nose attachment. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Rubber coated hooks protect wheels. Charcoal metallic powder-coated jack with gold zinc-coated handle and hardware. The hi-lift lm-100 lift-mate allows any Hi-Lift jack to lift a wheel or vehicle directly from the wheel.

Neoprene construction. The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles. Designed to fit most curved steel bumpers. 5, 000 pound lift capacity. The hi-lift jack hl484 48 inch cast and steel jack is constructed with a mix of cast components and four high-strength stamped steel components.

Hi-Lift Jack NJC Neoprene Jack Cover #ad - Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware. Safe use information stickers, including rated load details and operating instructions, affixed to handle. Secure fit. The hi-lift jack x-treme jack is our top of the line, all-cast jack that includes many special features.

Serrated teeth along one side helps scrape or level ground for base.

More information about ARB NJC #ad


Similar products



2-1/4" diameter Pack of 2 - Original Quick Fist Clamp for mounting tools & equipment 1"

#ad
#ad
Quick Fist 10010 #ad - Easily slips on and off for quick, no hassle removal when you need to use your jack. The rugged, capable hi-lift jack is designed for use with flat bumpers but the addition of this 3, 000 pound capacity accessory increases its capabilty to include most metal bumper vehicles. Designed to fit most curved steel bumpers.

Holds objects 1-inch to 2-1/4-inches 25 to 57 millimeters in diameter. Serrated teeth along one side helps scrape or level ground for base. Includes custom nose attachment. Also includes a pair of Hi-Lift gloves, necessary hardware and gear bag. Molded in red. Safe use information stickers, including rated load details and operating instructions, affixed to handle.

2-1/4" diameter Pack of 2 - Original Quick Fist Clamp for mounting tools & equipment 1" #ad - Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks. Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Two piece handle and socket is durable and reliable;Operation type : Mechanical. Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.

Unique design allows Handle-Keeper to be removed without taking off the top clamp-clevis. Alleviates jack sinkage on soft surfaces.

More information about Quick Fist 10010 #ad


Similar products